Dionex RFIC-ER 淋洗液再生啟動套件

更新時間：2019-11-06

簡要描述：

Dionex RFIC-ER 淋洗液再生啟動套件
該套件為為戴安ICS-1100和ICS-1600包含所有為6至12個月經營戴安RFIC-ER系統不間斷所需的耗材和非消耗性物品。

免費咨詢：010-61755520

發郵件給我們：yuweichina86@163.com

Dionex RFIC-ER 淋洗液再生啟動套件

使用的Thermo Scientific戴安RFIC-ER淋洗液再生啟動套件為戴安ICS-1100和ICS-1600包含所有為6至12個月經營戴安RFIC-ER系統不間斷所需的耗材和非消耗性物品。選擇套件包括油管，控制器和軟件的Dionex ICS-1000，-1500，-2000或-3000系統升級到RFIC-ER系統中，除了一組完整的消耗品的需要。

Dionex RFIC-ER 淋洗液再生啟動套件

訂貨信息：

RFIC-ER
Eluent Regeneration Startup Kit, Anion, for ICS-1100 and ICS-1600	069570
Eluent Regeneration Startup Kit, Cation, for ICS-1100 and ICS-1600	069569
RFIC-ER Anion Startup Kit	067797
RFIC-ER Cation Startup Kit	067798
配件
RFIC-ER Anion Consumables Kit	067791
RFIC-ER Cation Consumables Kit	067792

Allows Non-Stop Operation of an IC System for Up to Four Weeks at a Time

RFIC-ER is a low-cost alternative to RFIC-EG systems. Rather than generate eluent electrolytically using deionized water, RFIC-ER uses the electrolytic suppressor to regenerate the starting eluent. Eluent is prepared in the normal manner. After use and regeneration, the eluent is passed through a series of eluent purifier columns to produce pure eluent. The purified eluent is returned to the eluent bottle. One batch of original eluent can provide up to four weeks of non-stop operation.

Always on, always ready capability for ICS-1100, -1600, -2100, and -5000systems
System remains fully equilibrated and calibrated for long periods of time
Simple plumbing and easy-to-understand schematic
Low cost of ownership
Ideal for the analysis of common anions and cations in drinking, surface and ground water samples
Operator errors are significantly reduced or eliminated

Eluent Regeneration System Specifications
Eluent Controller
Dimensions (h × w × d):	13.6 in × 4.1 in × 4 in 34.5 cm × 10.5 cm × 10 cm
Weight:	1.76 lb 0.8 kg
Maximum Operating Pressure:	3000 psi post pump 200 psi post suppressor
Back Pressure:	Less than 335 psi at 1.0 mL/min
Maximum Flow Rate:	2.0 mL/min
Eluent Compatibility:	Carbonate eluents up to 20 mM MSA eluents up to 34 mM
Solvent Compatibility:	Not compatible with organic solvents in mobile phase
Temperature Range:	5 °C to 40 °C
Eluent Purification Column
Lifetime:	91 days using AS23 chemistry
Analyte Trap Columns
Capacity:	130,000 μL (e.g., 5200 × 25 μL injections)